We disassemble iPhone 4, 4S, 5, 5S + Video
Posted by: 07.03.2018
Hello everyone, dear lovers and owners of Apple technology. In today's article I will tell you how to disassemble iPhone 4, 4s, 5, 5s. I do not know why you need to disassemble your mobile Apple gadget, but still I recommend not to do this.
If your iPhone does not work, then do not “self-medicate” it, there is a high probability that you will make it even worse, it’s better to seek help from a specialist, professional. If you decide to disassemble the iPhone yourself, then learn that you will disassemble it, but it will be much more difficult to assemble it back than to disassemble it.
If you still decide to disassemble your gadget yourself, then proceed, the instruction on each of the iPhone models is below. Also for better perception of information, I publish video tutorials on disassembly.
So, to disassemble the iPhone, follow these steps.:
- Turn off your gadget. Turn on the mute mode (switch is on the side of the device). In principle, the Mute mode can be omitted because it is optional. But do not forget to turn off the device, do not disassemble the iPhone if it is turned on.
- At the bottom of the iPhone (where you connect the charging), find the two screws and use a screwdriver to unscrew them. For these purposes, you will need a special, small screwdriver, you can buy it in any specialized stores.
- Now remove the cover. To do this, slide it up. Press down the cover lightly with your thumbs and pull upwards. No need to push with all your might, otherwise you risk damaging your iPhone.
Below you can find a detailed video disassembly iPhone. After watching it, everything will become clear to you.
Since the iPhone 4S is almost identical to the iPhone 4, then you can use the previous instructions for parsing the iPhone 4.
To disassemble the fifth iPhone, follow these steps:
- On the bottom of the iPhone 5 (the side where the hole is for charging) we find two bolts and unscrew them with a screwdriver. As I mentioned above, for these purposes you will need a special small screwdriver.
- Further, using a special sucker, you need to separate the display from the device (you can see more clearly in the video below). To perform this step, you will need a special sucker, you can buy it in specialized stores.
- Next, unscrew the three screws securing the screen of the display module loops.
Further, in order to be as clear as possible and clearly see the video, located below on this page. In it, the author shows in maximum detail and clearly how to disassemble the iPhone 5.
Since the iPhone 5 and iPhone 5S models are almost identical, the instruction above can be used for parsing.
That's all, I hope you find the information published in this small note useful. I would be grateful if you leave your opinion in the comments to this article.. To do this, use the comment form below.